Fortinet MR1 Switch User Manual


 
25
1.3 Front-Panel Components
The front panel of the switch consists of 48 1-Giga interfaces, 4 LED indicators, an RS-232
communication port, and two SFP (Mini-GBIC) Combo ports.
4 LEDs divided into two parts. 2 LED indicators on the upper display the status and power the
switch. 2 LED indicators on the lower are used to display the status of SFP interface. An
RS-232 DCE console port is for setting up and managing the switch via a connection to a
console terminal or PC using a terminal emulation program.
1.4 LED Indicators
2 LED indicators on the upper represent the status and power the switch. 2 LED indicators
on the lower are used to display each activity and link status of two SFP interfaces.
1.5 Rear Panel Description
The rear panel of the switch contains an AC power connector and a slot to plug in the 10 GE
daughter board.
The AC power connector is a standard three-pronged connector that supports the power
cord. Plug the female connector of the provided power cord into this socket, and the male
side of the cord into a power outlet. The switch automatically adjusts its power setting to any
supply voltage in the range from 100 ~ 240 VAC at 50 ~ 60 Hz.
The FortiSwitch-100 ships with one of two different daughter board types that provide the 10
GE uplink interfaces. For the FS-TRX100-CX4, the daughter board provides four powered
CX4 interfaces; For the FS-TRX100-SFP it provides four SFP+ interfaces.