Filter
Top Products
613
Non-Configurable Data
Version - The current value of the DVMRP version string.
Total Number of Routes - The number of routes in the DVMRP routing table.
Reachable Routes - The number of routes in the DVMRP routing table that have a non-infinite metric.
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect immediately.
These changes will not be retained across a power cycle unless a save is performed.
Configuring DVMRP Interface Configuration Page
Selection Criteria
Slot/Port - Select the interface for which data is to be configured. You must configure at least one router
interface before you configure a DVMRP interface. Otherwise you will see a message telling you that no
router interfaces are available, and the configuration screen will not be displayed.
Configurable Data
Interface Mode - Select enable or disable from the pull-down menu to set the administrative mode of the
selected DVMRP routing interface.
Interface Metric - Enter the DVMRP metric for the selected interface. This value is sent in DVMRP
messages as the cost to reach this network. Valid values are from (1 to 31).
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect immediately.
These changes will not be retained across a power cycle unless a save is performed.