Filter
Top Products
● Turn the
printer off
then on.
● Check the
power cord
connections
and the
power switch.
● Plug the
printer into a
different
outlet.
● Check that
the power
supplied to
the printer is
steady, and
meets printer
specifications.
(See
Electrical
specifications.
)
● Press a
printer
control panel
button to see
if the printer
responds.
● Turn the
printer power
off, and then
turn the
printer power
on.
● Turn the
printer power
off and then
on. When
XXX MB
appears on
the control-
panel
display,
press and
hold down
(S
ELECT
button) until
all three
lights stay
on. This
could take
up to
10 seconds.
Then,
release
(S
ELECT
button).
Press
(D
OWN
button) to
scroll
through the
available
languages.
Press
(S
ELECT
button) to
save the
desired
language as
the new
default.
● Make sure
that the
desired
language is
selected at
the printer
control panel.
● Turn the
printer power
off, and then
turn the
printer power
on.
● Go to
Interpreting
control-panel
messages.
2 Can you print a configuration page?
(See Configuration page.)
YES Go to step 3.
NO
A configuration page does
not print.
A blank page prints. A message other than
READY or PRINTING
CONFIGURATION appears
on the printer control panel
display.
ENWW Troubleshooting flowchart 121