Filter
Top Products
Control panel message Description Recommended action
LOAD TRAY XX
[TYPE][SIZE]
To continue press
alternates with
Move tray switch to
CUSTOM
A job is sent that requires a specific type
and size that is not available in the tray
that is indicated.
Move the tray switch to the CUSTOM
position if another tray is available.
LOAD TRAY XX
[TYPE][SIZE]
To continue press
alternates with
Recommend move tray
switch to STANDARD
A job is sent that requires a specific type
and size that is not available in the tray
that is indicated.
If the size is detectable and another tray
is available, move the switch to the
STANDARD position.
LOAD TRAY XX
[TYPE][SIZE]
To continue press
alternates with
To use another
tray press
A job is sent that requires a specific type
and size that is not available in the tray
that is indicated.
Press (S
ELECT
button) to use a type
and size that are available in another tray.
MANUALLY FEED
[TYPE][SIZE]
To continue press
alternates with
MANUALLY FEED
[TYPE][SIZE]
For help press
The printer is waiting for media to be
loaded in tray 1 for manual feed.
Load the requested media into tray 1
and press (S
ELECT
button).
MANUALLY FEED
[TYPE][SIZE]
To use another
tray press
The printer is waiting for media to be
loaded in tray 1 for manual feed.
Press (S
ELECT
button) to use a type
and size that are available in another tray.
MANUALLY FEED
OUTPUT STACK
Then press
to
print second sides
The first side of a manual duplex job has
been printed and the device is waiting
for you to insert the output stack to
complete the second side.
1. Load the output stack into tray 1,
maintaining the same orientation
with printed side down.
2.
To continue printing, press
(S
ELECT
button) to exit the printer
message and then press
(S
ELECT
button) to print.
Interpreting control-panel messages (continued)
162 Chapter 4 Problem solving ENWW