Filter
Top Products
Item Values Explanation
TRAY [N] SIZE *LETTER
LEGAL
A4
Use this item to set the value to
correspond with the media size
that is currently loaded in the
specified tray, where [N] is the
number of the tray.
This item appears only if an
optional tray is installed. The
available sizes might vary
depending upon the optional
feeder device that is installed.
Tray [N] Custom
UNIT OF MEASURE
X DIMENSION
Y DIMENSION
This item appears only if a tray
is set to a custom size.
UNIT OF MEASURE: Use this
option to select the unit of
measure to use when you set
custom paper sizes for the
specified tray.
X DIMENSION: Use this item
to set the measurement of the
width of the paper
(measurement from side to
side in the tray). The options
are 3.0 to 8.50 INCHES or 76
to 216 MM.
Y DIMENSION: Sets the
measurement of the length of
the paper (measurement from
front to back in the tray). The
options are 5.0 to 14.00
INCHES or 127 to 356 MM.
After the Y DIMENSION value
is selected, a summary screen
appears. This screen contains
feedback that summarizes all
the information that was
specified on the previous three
screens, such as TRAY 1
SIZE= 8.50 x 14 INCHES,
Setting saved.
212 Appendix B Control panel menus ENWW