HP (Hewlett-Packard) 4250/4350 Printer User Manual


 
Item Values Explanation
STAPLES *NONE
ONE
Determines whether print jobs are stapled or not.
NONE: Turns off stapling.
ONE: Turns on stapling.
NOTE
Selecting the stapler at the printer control panel
changes the default setting to staple. It is
possible that all print jobs will be stapled.
For information about selecting the stapler at the
printer control panel, see
Stapling documents.
STAPLES OUT
*STOP
CONTINUE
Determines how the printer behaves if the
stapler runs out of staples, as indicated by the
REPLACE STAPLE CARTRIDGE message on
the printer control-panel display.
STOP: The printer stops printing until you refill
the stapler.
CONTINUE: The stapler accepts print jobs if it is
out of staples, but the pages are not stapled.
For information about ordering a new staple
cartridge, see
Part numbers. For information
about refilling the stapler, see
Loading staples.
I/O submenu
Items on the I/O (input/output) menu affect the communication between the printer and the
computer. The contents of the I/O submenu depend on which EIO card is installed.
The section that follows lists the settings and possible values. In the Values column, the
default value for each setting is the one with an asterisk (*) next to it.
Item Values Explanation
I/O TIMEOUT
5 to 300 (*15)
SECONDS
Select the I/O timeout period in seconds.
Use this setting to adjust timeout for the best
performance. If data from other ports appear in
the middle of your print job, increase the timeout
value.
PARALLEL
INPUT
HIGH SPEED
ADVANCED
FUNCTIONS
Configure the parallel features.
HIGH SPEED: Select YES to enable the printer
to accept the faster parallel communications that
are used for connections with newer computers.
ADVANCED FUNCTIONS: Turn the bidirectional
parallel communication on or off. The default is
set for a bidirectional parallel port (IEEE-1284).
The function allows the printer to send status
readback messages to the computer. (Turning
the parallel advanced functions on might slow
language switching.)
ENWW Configure Device menu 225