Filter
Top Products
ENWW Mode menus 237
Time Selects the method in which a black-and-white fax will be transmitted (color faxes
are sent only in the realtime mode):
z REALTIME
The fax is transmitted directly from the scan while you wait at the control
panel. If a realtime fax is interrupted or the all-in-one is turned off, you must
rescan the fax job. This is the fastest option. Use this option especially for
long faxes, because there might not be enough memory in the all-in-one for a
long fax if you use the non-realtime option.
z NON-REALTIME
The fax is scanned into memory first, and then transmitted. You do not have
to wait for the fax to finish.
z DELAYED
The fax is transmitted at a time that you specify.
Resolution Selects the setting for resolution.
Black-and-white faxes:
z STANDARD (98 dpi)
z FINE (196 dpi)
z S. FINE (300 dpi)
z PHOTO (196 dpi, with halftoning)
Color faxes:
z STANDARD (200 dpi, high compression)
z FINE (200 dpi, low compression)
z S. FINE (200 dpi, low compression)
z PHOTO (200 dpi, high compression)
You can also reach the resolution option by pressing Q
UALITY on the control
panel.
Lighter/darker Adjusts the lightness and darkness of faxes (from -4 to +4).
You can also reach the contrast option by pressing L
IGHTER/DARKER on the
control panel.
Paper size Selects the paper size:
z A4
A4 size (210 by 297 mm)
z LEGAL
Legal size (8.5 by 14 inches)
z LETTER
U.S. letter size (8.5 by 11 inches)
The option sets the size for both the original and the output, because it is
assumed that these are to be identical.
You can also reach the paper size option by pressing T
RAY/TYPE on the control
panel.
Poll to receive Allows user to type fax number(s) to poll.
Setup Opens the FAX SETUP menu. See FAX SETUP menu for an explanation of the
menu.
Menu item Description