Filter
Top Products
40 3 - Using the all-in-one ENWW
3 If you are loading paper that is between 279 mm and 356 mm long (11 inches and 14
inches long) (such as legal-size paper), move the latch on the tray to the right as shown in
the following illustration, and then lower the front of the tray.
Note You do not need to lower the front of the tray when loading A4-size or letter-size or smaller
media.
4 Place the media with the print-side down in the tray and slide the media width and length
adjustors to the edges of the media.
5 If you are loading tray 1, reattach and close the output tray.
6 Slide the tray into the all-in-one.
CAUTION Do not raise the front of the tray if legal-size media is loaded, or damage to the media or
all-in-one can result.
A4/letter
Legal