HP (Hewlett-Packard) 9100 series All in One Printer User Manual


 
84 7 - Using memory cards ENWW
2 Insert the memory card into the appropriate slot on the all-in-one. See Inserting and
removing a memory card for more information.
3 Open the flatbed scanner lid, place the top of the completed proof sheet face-down on the
scanner glass, and then close the flatbed scanner lid.
4 If required, type your PIN on the keypad or keyboard.
5 Press P
HOTO.
6 Press (down) to move to Scan thumbnails.
7 Press S
TART. The all-in-one scans the proof sheet.
8 Press - or + to select either E-MAIL (network connection) or PRINT, and then press
(select).
9 If you selected E-MAIL, use the following steps:
a Type one or more e-mail addresses on the keypad or keyboard, and then press
(select).
b Type the SUBJECT information, and then press (select).
c Type the FROM information, and then press (select).
The proof sheet is scanned and the all-in-one either prints the photos or sends them as
attachments to an e-mail message.