24 2 - Installing accessories ENWW
5 Remove the DIMM cover.
6 Remove the DIMM from the antistatic package.
7 Align the DIMM so that the notches on the lower edge line up with the raised marks in the
DIMM slot. You can use any empty slot.
8 Insert and press the DIMM into the slot until the DIMM snaps into place.
9 Replace the DIMM cover, and then replace the side cover.
10 Reattach the power cord and any cables, and then press (P
OWER) to turn on the
all-in-one.
7
8