Filter
Top Products
ENWW Setup menus 243
SCAN SETUP menu
E-MAIL SETUP menu
PHOTO menu
Error correction
mode
Turns the error-correct mode on or off. Normally, the all-in-one monitors the
signals on the phone line while it is sending or receiving a fax. If the all-in-one
detects an error signal during the transmission and the error-correction setting is
on, the all-in-one can request that a portion of the fax be resent.
Turn off error correction only if you are having trouble sending or receiving a fax,
and you want to accept the errors in the transmission. Turning off the setting
might be useful when you are trying to send a fax to another country/region or
receive a fax from another country/region, or if you are using a satellite phone
connection.
When you change the Country/region option on the ADMIN menu, this option
changes to the default for the country/region that has been chosen.
See Setting silent detection on older-model fax machines for more information.
Silent detect Controls whether or not you can receive faxes from older-model fax machines
that do not emit a fax signal during fax transmissions. At the time of this
publication, these silent-model fax machines represented very few of the fax
machines in use.
Turn on silent detect only if you regularly receive faxes from someone who uses
an older-model fax machines.
See Setting silent detection on older-model fax machines for more information.
Menu item Description
Folder speed-dial Sets up speed-dial entries for network folders.
See Setting up network folders as speed-dial entries for more information.
Scan defaults Saves the current scan settings as the default settings for scan jobs.
Menu item Description
E-mail speed-dial Sets up speed-dial entries for e-mail addresses.
See Setting up e-mail addresses as speed-dial entries or groups for more
information.
E-mail defaults Saves the current e-mail settings as the default settings for e-mail jobs.
Auto BCC Sets the all-in-one so that it automatically sends a blind copy of all e-mail
messages that are sent from the control panel to the e-mail address that you
specify.
See Configuring automatic blind copy (BCC) for more information.
Configure SMTP Sets the SMTP server name and port number, authentication logon account
name and password, and e-mail attachment size.
See Configuring SMTP for more information.
Menu item Description
Photo defaults Saves the current scan settings as the default settings for photo jobs.
Menu item Description