Filter
Top Products
48 3 - Using the all-in-one ENWW
Using special media
This section contains information about the following special media types that you can use
with the all-in-one.
z Using cards and envelopes
z Using transparencies
z Using custom-size media
z Using photo paper
See Choosing the print media for information about supported media types and sizes.
Note Always load special media in tray 1, and select the correct media type, the print quality, and
the media source for the job.
Using cards and envelopes
If your software program supports printing on cards or envelopes, follow the instructions for
the program to use them.
Always use tray 1 to print cards and envelopes.
To use cards and envelopes
1 Remove tray 1 from the printer.
2 Remove the output tray, and then remove all media from tray 1.
3 Insert the cards or envelopes into the tray (envelopes should be loaded with the flaps
facing up and to the right).
4 Slide the media width and length adjustors to the edges of the cards or envelopes.
5 Replace the output tray and insert tray 1 into the printer.
6 Start the job from your program, making sure that you select the correct media size and
type.
See Changing settings for the all-in-one for more information about setting the printing
options.