Filter
Top Products
6. Clean the face and edges around the ink nozzle area with the swab, as shown below.
1 Nozzle plate (do not clean)
2 Face and edges around the ink nozzle area
CAUTION: Do not clean the nozzle plate.
7. Hold the print cartridge with the HP logo on top, and insert the print cartridge back
into the slot. Make sure you push the print cartridge in firmly until it snaps into place.
8. Repeat if necessary for the other print cartridge.
9. Gently close the print cartridge door and plug the power cord into the back of the
HP All-in-One.
Related topics
“
Clean the print cartridges” on page 85
Remove ink from your skin and clothing
Follow these instructions to remove ink from your skin and clothing:
Surface Remedy
Skin Wash the area with an abrasive soap.
White fabric Wash the fabric in cold water and use chlorine bleach.
Color fabric Wash the fabric in cold water and use sudsy ammonia.
CAUTION: Always use cold water to remove ink from fabric. Warm or hot water can
set the ink into the fabric.
Turn off the HP All-in-One
To avoid damaging the HP All-in-One, you must properly shut it down by using the On
button located on the device. Do not turn the HP All-in-One off by unplugging the power
cord or turning off a power strip.
Chapter 11
88 Maintain the HP All-in-One
Maintain the HP All-in-One