Filter
Top Products
CAUTION Before adjusting the sub-scroller back tension you must first adjust the main scroller
media feed.
1. Insert a screwdriver (1) in the hole of the hexagonal adjustment shaft protruding from the upper part
of the tension arm (2).
NOTE You could also use a suitably sized wrench (spanner) or an equivalent tool to turn
the adjustment shaft instead of inserting a screwdriver in the hole.
2. If you are trying to correct dark banding that the overlapping joints in the path on the sub-scroller
cause, turn the adjustment shaft counterclockwise (1).
If you are trying to correct light banding distant joints in the path on the sub-scroller cause, turn the
adjustment shaft clockwise (2).
126 Chapter 3 How do I use dual media rolls? ENWW
How do I use dual media rolls?