Filter
Top Products
CAUTION Inserting the media obliquely or inserting media with wrinkles causes a media
jam or skewed feed.
a. Insert the top edge of the media (1) into media feeder (2) while stretching it outwards to prevent
any wrinkling.
b. If the media curls up (1) or down (2), making it hard to insert into the media feeder, place a
backing sheet (3) on or under the curled media to make loading easier.
c. At the front of the printer, use the black media advance switch to feed the media through the
media feeder until it almost reaches the floor.
d. Smooth out the media from the center towards the edges of the platen to tension the center area
of the media.
ENWW Offset media loading using the main scroller 87
How do I perform basic media
o
p
erations?