Filter
Top Products
5. When the printing on the top side completes, two additional lines are printed. The first is a solid line
(2) which is used as a guide to align the print position between the top side and the back; the second
line is a dashed line (1) to use as a cutting guideline.
6. Once the printing has completed, feed enough media out of the printer and cut the media along the
dashed line.
7. With a suitable marker put guide marks (2) on the edges of the back of the media (3), where the edges
are intersected by the solid line (1).
ENWW Printing on the back of the media from the take-up reel (without relocating from take-
up side)
147
How do I perform double-sided
p
rintin
g