Filter
Top Products
a. Select MAIN using the or keys.
b. Press the OK key to confirm the selection.
CAUTION To print on thick tarpaulin (0.5 mm or thicker), raise the printhead height
first (Refer to
Change the printhead height).
NOTE If tarpaulin media designed for single side printing (different surface finishes)
is used, print on the rougher side first.
3. Feed the media onto the take-up reel (Refer to Use the take-up reel).
4. With a suitable marker put guide marks (1), on the edges of the back of the media (3), where the edges
intersect the platen groove (2). These marks will be useful for aligning top side for positioning the
media when printing on the back.
5. Print on the top side of the media.
6. Once the printing has completed, remove the tension bars on the feed side and media take-up side.
132 Chapter 4 How do I perform double-sided printing ENWW
How do I perform double-sided
p
rintin
g