Filter
Top Products
23. Make sure the media (1) runs over the liner separator bar (3) and the liner (2) is under the separator
bar.
24. Close the rear cover.
To complete the procedure, follow the front panel instructions.
25. Confirm the position of the media edge guards and press the OK key.
26. Select the media feed position.
a. Select BACKm using the or keys.
b. Press the OK key to confirm the selection.
27. Select a media type.
a. Select the media type using the or keys.
b. Press the OK key to confirm the selection.
164 Chapter 5 How do I print with a liner ENWW
How do I print with a liner