Filter
Top Products
15. Lower the media load lever (1).
16. Adjust the media edge guards (1) so that they are correctly positioned over the edge of the media.
17. Close the rear cover.
To complete the procedure, follow the front panel instructions.
18. Confirm the position of the media edge guards and press the OK key.
19. Select the media position.
a. Select BACKm using the or keys.
b. Press the OK key to confirm the selection.
20. Select a media type.
ENWW Printing on the back of the media from the feed side (after relocating from take-up
side)
143
How do I perform double-sided
p
rintin
g