Filter
Top Products
Printing on the back of the media after rewinding
CAUTION Use the liner when printing at a high printing rate (or ink on the media is not dry) to
prevent the media from adhering to the platen (Refer to
How do I print with a liner).
After printing on the top side (A), the media is rewound on the roll in the paper feeder (B), the roll is removed
from the main scroller and reversed on the scroller (C), and printing on the back of the media is performed
(D).
The drying time of a printed side varies depending on the image, so you must verify that the printed side
is completely dry before printing on the other side.
In general, it is best to dry the printed side for more than three hours. For images with a dark intensity a 24
hours is required.
1. Install the media on the main scroller of the printer (Refer to Install a media roll in the printer using the
main scroller).
2. Select the media feed position.
ENWW Printing on the back of the media after rewinding 131
How do I perform double-sided
p
rintin
g