Filter
Top Products
114 Configuring and managing ports and VLANs
NN47250-500 (320657-F Version 02.01)
For example, to display the aging timeout period for all configured VLANs, type the following command:
WSS# show fdb agingtime
VLAN 2 aging time = 300 sec
VLAN 1 aging time = 300 sec
Changing the aging timeout period
To change the aging timeout period, use the following command:
set fdb agingtime vlan-id age seconds
For example, to set the aging timeout period for VLAN 2 to 600 seconds, type the following command:
WSS# set fdb agingtime 2 age 600
success: change accepted.
Port and VLAN configuration scenario
This scenario assigns names to ports, and configures AP access ports, wired authentication ports, a
load-sharing port group, and VLANs.
1 Assign names to ports to identify their functions, and verify the configuration change. Type the
following commands:
WSS# set port 1 name wss_mgmt
success: change accepted.
WSS# set port 2 name finance
success: change accepted.
WSS# set port 3 name accounting
success: change accepted.
WSS# set port 4 name shipping
success: change accepted.
WSS# set port 5 name lobby
success: change accepted.
WSS# set port 6 name conf_room1
success: change accepted.
WSS# set port 7 name conf_room2
success: change accepted.
WSS# set port 8-13 name manufacturing
success: change accepted.
WSS# set port 14-18 name rsrch_dev
success: change accepted.