Filter
Top Products
66 WSS setup methods
NN47250-500 (320657-F Version 02.01)
Enable password [optional]: enable
Do you wish to set the time? [y]: y
Enter the date (dd/mm/yy) []: 31/03/06
Is daylight saving time (DST) in effect [n]: n
Enter the time (hh:mm:ss) []: 04:36:20
Enter the timezone []: PST
Enter the offset (without DST) from GMT for 'PST' in hh:mm
[0:0]: -8:0
Do you wish to configure wireless? [y]: y
Enter a clear SSID to use: public
Do you want Web Portal authentication? [y]: y
Enter a username to be used with Web Portal, <cr> to exit: user1
Enter a password for user1: user1pass
Enter a username to be used with Web Portal, <cr> to exit:
Do you want to do 802.1x and PEAP-MSCHAPv2? [y]: y
Enter a crypto SSID to use: corporate
Enter a username with which to do PEAP-MSCHAPv2, <cr> to exit:
bob
Enter a password for bob: bobpass
Enter a username with which to do PEAP-MSCHAPv2, <cr> to exit:
Do you wish to configure access points? [y]: y
Enter a port number [1-2] on which an AP resides, <cr> to exit:
2
Enter AP model on port 2: 2330
Enter a port number [1-2] on which an AP resides, <cr> to exit:
Do you wish to configure distributed access points? [y]: y
Enter a AP serial number, <cr> to exit: 0422700351
Enter model of AP with S/N 0422700351: 2330
Enter a AP serial number, <cr> to exit:
success: created keypair for ssh
success: Type "save config" to save the configuration
2350-aabbcc# save config
6 Optionally, enable Telnet.
2350-aabbcc# set ip telnet server enable
7 Verify the configuration changes.
2350-aabbcc# show config
8 Save the configuration changes.
2350-aabbcc# save config
Remote WSS configuration
You can use WMS Services running in your corporate network to configure WSSs in remote offices. The following
remote configuration scenarios are supported: