WSS setup methods 57
Nortel WLAN—Security Switch 2300 Series Configuration Guide
CLI
You can configure a switch using the CLI by attaching a PC to the switch’s Console port.
After you configure the switch for SSH or Telnet access, you also can use these protocols to access the CLI.
Web View
You can use a switch’s web management interface, Web View, to configure the switch. For access information, see
“Enabling and logging onto Web View” (page 695).
Note. Web View is different from the Web Quick Start application. Web View is a
web-based management application that is available at any time on a switch that already
has IP connectivity. (Web View access also requires the switch’s HTTPS server to be
enabled.) The Web Quick Start application is accessible only on unconfigured switches.