Filter
Top Products
Configuring APs 277
Nortel WLAN—Security Switch 2300 Series Configuration Guide
The terse option displays a brief line of essential status information for each directly connected AP.
The all option displays information for all directly attached APs configured on the switch.
The following command displays the status of a AP:
WSS# show ap status 1
ap: 1, IP-addr: 10.2.30.5 (vlan 'vlan-corp'), AP model: 2330,
manufacturer: Nortel, name: ap01
fingerprint: b4:f9:2a:52:37:58:f4:d0:10:75:43:2f:45:c9:52:c3
====================================================
State: operational (not encrypted)
CPU info: IBM:PPC speed=266666664 Hz version=405GPr
id=0x29c15335347f1919 ram=33554432
s/n=0333703027 hw_rev=A3
Uptime: 18 hours, 36 minutes, 27 seconds
Radio 1 type: 802.11g, state: configure succeed [Enabled] (802.11b protect)
operational channel: 1 operational power: 14
base mac: 00:0b:0e:00:d2:c0
bssid1: 00:0b:0e:00:d2:c0, ssid: public
bssid2: 00:0b:0e:00:d2:c2, ssid: employee-net
bssid3: 00:0b:0e:00:d2:c4, ssid: mycorp-tkip
Radio 2 type: 802.11a, state: configure succeed [Enabled]
operational channel: 64 operational power: 14
base mac: 00:0b:0e:00:d2:c1
bssid1: 00:0b:0e:00:d2:c1, ssid: public
bssid2: 00:0b:0e:00:d2:c3, ssid: employee-net
bssid3: 00:0b:0e:00:d2:c5, ssid: mycorp-tkip
(For information about the fields in the output, see the Nortel WLAN Security Switch 2300 Series Command Line
Reference.)
Displaying static IP address information for APs
To display information about APs that have been configured with static IP address information, use the following
command:
show ap boot-configuration ap-num
To display statistics counters for AP 1, type the following command:
WSS# show ap boot-configuration 1
Flags: 11
ap: 1
Enable ip: yes
Enable vlan: no
Enable wss: yes
Vlan Tag: off
IP address: 172.16.0.42 IP netmask: 255.255.255.0
gateway: 172.16.0.20