Configuring APs 213
Nortel WLAN—Security Switch 2300 Series Configuration Guide
After the AP receives the configuration information from the WSS, it is then operational on the network as a wireless
access point.
AP boot examples
The following figures show AP boot examples:
• Figure 7 on page 214 shows an example of the boot process for an AP connected through a Layer 2 network.
• Figure 8 on page 216 shows an example of the boot process for an AP connected through a Layer 3 network.
• Figure 9 on page 218 shows an example of the boot process for a dual-homed AP that has one direct connection to
a WSS and an indirect connection through a Layer 2 network.
• Figure 10 on page 219 shows an example of the boot process for an AP that has been configured with static IP
information.