AirDefense integration with the Nortel WLAN 2300 system 341
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Converting an AirDefense sensor back to an AP
Once an AP is converted to an AirDefense sensor, you can convert the AP back to a Nortel Access Point by doing the
following:
1 Open a Web browser and establish a secure (https) connection to the converted AP.
2 Click the Revert button in the converted AP’s Web interface.
When you do this, the AP reboots and comes up as a Nortel Access Point.
Clearing the AirDefense sensor software from the AP’s configuration
To clear the AirDefense sensor software file from the AP’s configuration, use the following command:
clear ap ap-num image
For example, the following command causes the AirDefense sensor software file to be cleared from the configuration of
Distributed AP 1:
WSS# clear ap 1 image
success: change accepted.
The next time the AP is booted, it will come up as a Nortel Access Point.