Filter
Top Products
Appendix A:Troubleshooting a WSS 683
Nortel WLAN—Security Switch 2300 Series Configuration Guide
SQA: SQA2BServer
set authentication dot1x *@xmpl.com pass-through sg1
set authentication dot1x *@xmpl.com pass-through SQA
set authentication dot1x EXAMPLE\* peap-mschapv2 sg1
user sqa
password = 08325d4f (encrypted)
session-timeout = 3600
mac-user 00:00:a6:47:ad:03
session-timeout = 3600
vlan-name = vlan-wep
mac-user 00:00:65:16:0d:69
session-timeout = 3600
vlan-name = vlan-eng
(For more information about AAA, see “Configuring Web-based AAA for administrative and local access” (page 69)
and “Configuring AAA for network users” (page 467).)
Viewing FDB information
The show fdb command displays the hosts learned by the WSS and the ports to which they are connected. To display
forwarding database (FDB) information, type the following command:
WSS# show fdb
* = Static Entry. + = Permanent Entry. # = System Entry.
VLAN TAG Dest MAC/Route Des [CoS] Destination Ports or VCs/[Protocol Type]
-------------- --------------------------- ------------- --------------------------------------------------
130 3 00:05:5d:7e:94:83 1 [ALL]
130 130 00:02:2d:85:6b:4d t:192.168.14.6 [ALL]
130 130 00:0b:0e:12:34:56 t:192.168.15.5 [ALL]
130 130 00:0b:0e:02:76:f6 t:192.168.14.6 [ALL]
130 2 00:02:2d:86:bd:38 3 [ALL]
130 3 00:05:5d:84:d3:d3 1 [ALL]
4097 00:0b:0e:00:04:30 # CPU [ALL]
4096 00:0b:0e:00:04:30 # CPU [ALL]
130 00:0b:0e:00:04:30 # CPU [ALL]
Total Matching FDB Entries Displayed = 32
dynamic = 27, static=0, permanent=0, system=5
(For more information about forwarding databases, see “Managing the layer 2 forwarding database” (page 111).)
Viewing ARP information
The show arp command displays the ARP aging timer and ARP entries in the system. To display ARP information, type
the following command:
WSS# show arp
ARP aging time: 1200 seconds
Host HW Address VLAN Type State
------------------------------ ----------------- ----- ------- --------