Filter
Top Products
Configuring quality of service 361
Nortel WLAN—Security Switch 2300 Series Configuration Guide
WSS# set qos cos-to-dscp-map 6 dscp 55
success: change accepted.
Using the client DSCP value to classify QoS level
To configure WSS Software to classify the QoS level of IP
Enabling broadcast control
To enable broadcast control features on a service-profile basis, using the following commands:
set service-profile name proxy-arp {enable | disable}
set service-profile name dhcp-restrict {enable | disable}
set service-profile name no-broadcast {enable | disable}
For example, to enable all these broadcast control features in service profile sp1, use the following commands:
WSS# set service-profile sp1 proxy-arp enable
success: change accepted.
WSS# set service-profile sp1 dhcp-restrict enable
success: change accepted.
WSS# set service-profile sp1 no-broadcast enable
success: change accepted.
Displaying QoS information
You can display the following types of information for QoS:
• Radio profile QoS settings: QoS mode, U-APSD support
• Service profile QoS settings: CAC, static CoS, and broadcast control settings
• Broadcast control settings
• Default CoS mappings
• Individual DSCP-to-CoS or CoS-to-DSCP mappings
• The DSCP table (a reference of standard mappings from DSCP to IP ToS and IP precedence)
• QoS Statistics for the AP forwarding queues
Displaying a radio profile’s QoS settings
To display the QoS mode and all other settings for a radio profile, use the following command:
show radio-profile {name | ?}
The following example shows the configuration of radio profile rp1.