Configuring and managing spanning tree protocol 371
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Changing the bridge priority
To change the bridge priority, use the following command:
set spantree priority value {all | vlan vlan-id}
Specify a bridge priority from 0 through 65,535. The default is 32,768. The all option applies the change
globally to all VLANs. Alternatively, specify an individual VLAN.
To change the bridge priority of VLAN pink to 69, type the following command:
WSS# set spantree priority 69 vlan pink
success: change accepted.