Filter
Top Products
Configuring and managing Mobility Domain roaming 169
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Use the following commands to configure a Mobility Domain consisting of a primary seed, secondary seed, and one or
more member switches:
On the primary seed:
set mobility-domain mode seed domain-name mob-domain-name
set mobility-domain member ip-addr
(for each member switch)
On the secondary seed:
set mobility-domain mode secondary-seed domain-name mob-domain-name seed-ip
primary-seed-ip-addr
set mobility-domain member ip-addr
(for each member switch)
On the other member switches in the Mobility Domain:
set mobility-domain mode member seed-ip primary-seed-ip-addr
set mobility-domain mode member secondary-seed-ip secondary-seed-ip-addr
When removing a secondary-seed switch from a mobility domain make sure that the secondary-seed member informa-
tion is removed from all members of the mobility domain. The primary seed has the secondary seed listed as a mobility
domain member, which has to be removed. The other members of the mobility domain which will have the secondary
seed information has to be removed.
On the primary seed issue type the following command to remove the secondary-seed from the mobility domain:
Syntax
clear mobility-domain member <ip address of secondary-seed>
On the other members of the mobility domain issue type the following command to remove the secondary-seed from the
mobility domain:
Syntax
clear mobility-domain secondary-seed
Displaying Mobility Domain status
To view the status of the Mobility Domain for the WSS, use the show mobility-domain command. For example:
WSS# show mobility-domain
Mobility Domain name: pleasanton
Member State Type (*:active) Model Version
--------------- ------------- --------------- -------- ---------- -------------- ---------
10.8.121.101 STATE_DOWN SEED 2382 6.0.0.0
10.8.121.102 STATE_UP SECONDARY-SEED* 2382 6.0.0.0
10.8.121.103 STATE_UP MEMBER 2382 6.0.0.0
10.8.121.104 STATE_UP MEMBER 2382 6.0.0.0