Filter
Top Products
176 Configuring and managing Mobility Domain roaming
NN47250-500 (320657-F Version 02.01)
The output shows that the client SHUTTLE\2\exmpl roamed from the AP connected to port 3 to the AP connected to
port 6 on the same WSS, and then roamed back to the AP connected to port 3.
WSS> show sessions network verbose
Client MAC: 00:06:25:13:08:33 GID: SESS-4-000404-98441-c807c14b
State: ACTIVE (prev AUTHORIZED)
now on: WSS 10.3.8.103, AP/radio 3/1, AP 00:0b:0e:ff:00:3a, as of 00:00:24 ago
from: WSS 10.3.8.103, AP/radio 6/1, AP 00:0b:0e:00:05:d7, as of 00:01:07 ago
from: WSS 10.3.8.103, AP/radio 3/1, AP 00:0b:0e:ff:00:3a, as of 00:01:53 ago
1 sessions total
(For more information about this command and the fields in the output, see the Nortel WLAN Security Switch 2300
Series Command Line Reference.)
Mobility Domain scenario
The following scenario illustrates how to create a Mobility Domain named sunflower consisting of three members from
a seed WSS at 192.168.253.21:
1 Make the current WSS the Mobility Domain seed. Type the following command:
WSS# set mobility-domain mode seed domain-name sunflower
success: change accepted.
2 On the seed, add the members of the Mobility Domain. Type the following commands:
WSS# set mobility-domain member 192.168.253.11
success: change accepted.
WSS# set mobility-domain member 192.168.111.112
success: change accepted.
3 For each member WSS, configure the IP address used to reach the seed WSS. Type the following
commands:
WSS# set mobility-domain member seed-ip 192.168.253.21
4 Display the Mobility Domain status. Type the following command:
WSS# show mobility-domain
Mobility Domain name: sunflower
Member State Status
--------------- ------------- --------------
192.168.111.112 STATE_UP MEMBER
192.168.253.11 STATE_UP MEMBER
192.168.253.21 STATE_UP SEED
U s e r N a m e S e s s I D I P o r M AC A d d r e s s V L A N N a m e P o r t / R a d i o
SHUTTLE
2 \ e x m p l
6* 10.3.8.55 default 3/1