Filter
Top Products
Configuring network domains 187
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Displaying network domain information
To view the status of Network Domains configured on the WSS, use the show network-domain command. The output
of the command differs based on whether the WSS is a member of a Network Domain or a Network Domain seed.
For example, a WSS that is a Network Domain member only, output such as the following is displayed:
WSS# show network-domain
Member Network Domain name: California
Member State Mode Mobility-Domain
--------------- ------------- ------ ---------------
10.8.107.1 UP SEED default
On a WSS that is a Network Domain seed, information is displayed about the Network Domain seeds with which the
WSS has a peer relationship, as well as the Network Domains of which the WSS is a member. For example:
WSS# show network-domain
Network Domain name: California
Peer State
--------------- -------------
10.8.107.1 UP
Member State Mode Mobility-Domain
--------------- ------------- ------ ---------------
10.1.0.0 DOWN SEED
Member Network Domain name:
Member State Mode Mobility-Domain
--------------- ------------- ------ ---------------
10.8.107.1 UP MEMBER default
10.1.0.0 DOWN SEED
(For more information about this command and the fields in the output, see the Nortel WLAN Security Switch 2300
Series Command Line Reference.)