Filter
Top Products
548 Configuring AAA for network users
NN47250-500 (320657-F Version 02.01)
Acct-Authentic=2
Acct-Multi-Session-Id=SESSION-4-1106424789
User-Name=Administrator@example.com
Acct-Session-Time=361
Event-Timestamp=1053536852
Acct-Output-Octets=2560
Acct-Input-Octets=5760
Acct-Output-Packets=20
Acct-Input-Packets=45
Vlan-Name=default
Calling-Station-Id=00-06-25-09-39-5D
Nas-Port-Id=2/1
Called-Station-Id=00-0B-0E-76-56-A0
If you configured accounting records to be sent to a RADIUS server, you can view the records of user roaming
at the RADIUS server. (For more information on these attributes, see “Supported RADIUS attributes”
(page 697).)
For information about requesting accounting records from the RADIUS server, see the documentation for your
RADIUS server.
Displaying the AAA configuration
To view the results of the AAA commands you have set and verify their order, type the show aaa command.
The order in which the commands appear in the output determines the order in which WSS Software matches
them to users.
(Sometimes the order might not be what you intended. See “Avoiding AAA problems in configuration order”
(page 549).)
For example:
WSS# show aaa
Default Values
authport=1812 acctport=1813 timeout=5 acct-timeout=5
retrans=3 deadtime=0 key=(null) author-pass=(null)
Radius Servers
Server Addr Ports T/o Tries Dead State
--------------------------------------------------------------------
rs-3 198.162.1.1 18211813530UP
rs-4 198.168.1.2 1821 1813 77 11 2 UP
rs-5 198.162.1.3 1821 1813 42 23 0 UP
Server groups
sg1: rs-3
sg2: rs-4
sg3: rs-5