Filter
Top Products
Configuring quality of service 345
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Transmit rates Data transmission rates supported by
each radio type. The following
categories are specified:
• Beacon
•Multicast
• Mandatory (a client must support
at least one of these rates to
associate)
• Disabled
• Standard (valid rates that are not
disabled and are not mandatory)
Defaults:
• Mandatory:
• 802.11a—6.0, 12.0, 24.0
• 802.11b—5.5, 11.0
• 802.11g—1.0, 2.0, 5.5, 11.0
• Disabled—None. All rates
applicable to the radio type are
supported by default.
• Beacon:
• 802.11a—6.0
• 802.11b—5.5
• 802.11g—5.5
• Multicast—auto for all radio types
(highest rate that can reach all
associated clients is used)
set service-profile
transmit-rates
See “Changing transmit rates”
(page 246).
Broadcast control Mechanisms to reduce overhead
caused by wireless broadcast traffic or
traffic from unauthenticated clients.
One or more of the following can be
enabled:
• Proxy ARP
• No-Broadcast
• DHCP Restrict
All three options are disabled by
default.
set service-profile proxy-arp
set service-profile no-broadcast
set service-profile dhcp-restrict
See the following:
• “Broadcast control”
(page 358)
• “Using the client DSCP value
to classify QoS level”
(page 361)
Table 1.QoS parameters (continued)
QoS Feature Description Configuration Command