Filter
Top Products
276 Configuring APs
NN47250-500 (320657-F Version 02.01)
vlan-name = orange
session-timeout = 300
service-type = 2
11a beacon rate: 6.0 multicast rate: AUTO
11a mandatory rate: 6.0,12.0,24.0 standard rates: 9.0,18.0,36.0,48.0,54.0
11b beacon rate: 2.0 multicast rate: AUTO
11b mandatory rate: 1.0,2.0 standard rates: 5.5,11.0
11g beacon rate: 2.0 multicast rate: AUTO
11g mandatory rate: 1.0,2.0,5.5,11.0 standard rates: 6.0,9.0,12.0,18.0,24.0, 36.0,48.0,54.0
(For information about the fields in the output, see the Nortel WLAN Security Switch 2300 Series Command Line
Reference.)
Displaying radio profile information
To display radio profile information, use the following command:
show radio-profile {name | ?}
Entering show radio-profile ? displays a list of radio profiles.
To display radio profile information for the default radio profile, type the following command:
WSS# show radio-profile default
No service profiles configured.
(For information about the fields in the output, see the Nortel WLAN Security Switch 2300 Series Command Line
Reference.)
Displaying AP status information
To display status information including link state and WSS status, use the following commands:
show ap status [terse] | [port-list | all [radio {1 | 2}]]
show ap status [terse] | [ap-num | all [radio {1 | 2}]]
Beacon Interval: 100 DTIM Interval: 1
Max Tx Lifetime: 2000 Max Rx Lifetime: 2000
RTS Threshold: 2346 Frag Threshold: 2346
Long Preamble: no Tune Channel: yes
Tune Power: no Tune Channel Interval: 3600
Tune Power Interval: 600 Power ramp interval: 60
Channel Holddown: 300 Countermeasures: none
Active-Scan: yes RFID enabled: no
WMM Powersave: no QoS Mode: wmm