Configuring Auto-RF 329
Nortel WLAN—Security Switch 2300 Series Configuration Guide
WSS# show auto-tune neighbors ap 2 radio 1
Total number of entries for port 2 radio 1: 5
Channel Neighbor BSS/MAC RSSI
------- ----------------- ---------- ------
1 00:0b:85:06:e3:60 -46
1 00:0b:0e:00:0a:80 -78
1 00:0b:0e:00:d2:c0 -74
1 00:0b:85:06:dd:00 -50
1 00:0b:0e:00:05:c1 -72
Displaying RF attributes
To display the current values of the RF attributes Auto-RF uses to decide whether to change channel or power settings,
use the following commands:
show auto-tune attributes [ap ap-num [radio {1 | 2| all}]]
show auto-tune attributes [ap ap-num [radio {1 | 2| all}]]
To display RF attribute information for radio 1 on the directly connected AP on port 2, type the following command:
WSS# show auto-tune attributes ap 2 radio 1
Auto-tune attributes for :
Noise: -92 Packet Retransmission Count: 0
Utilization: 0 Phy Errors Count: 0
CRC Errors count: 122