Filter
Top Products
695
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Appendix A: Enabling and logging
onto Web View
Web View is a web-based management application available on WSSs. You can use Web View for common configura-
tion and management tasks. On most WSS models (2382, 2360/2361, or 2350), you also can use Web View to perform
initial configuration of a new switch.
System requirements
Browser requirements
Web View is supported on the following browsers:
• Mozilla Firefox Version 1.0 or later
• Microsoft Internet Explorer Version 6.0 or later
TLS 1.0, SSL 2.0, or SSL 3.0 must be enabled in the browser. To enable TLS 1.0, SSL 2.0, or SSL 3.0 in Microsoft
Internet Explorer:
1 Select Tools > Internet Options to display the Internet Options dialog box.
2 Select the Advanced tab.
3 Scroll to the bottom of the list of options and select the TLS 1.0, SSL 2.0, or SSL 3.0 option to enable it.
4 Click OK.
WSS requirements
• The WSS’s HTTPS server must be enabled. (This option is enabled by default.) If HTTPS is disabled, you can
enable it using the following command:
set ip https server enable
• The switch must have an IP interface that can be reached by the PC where the browser is installed.
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 695
Logging onto Web View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 696