134 Configuring and managing IP interfaces and services
NN47250-500 (320657-F Version 02.01)
Managing Telnet server sessions
Use the following commands to manage Telnet server sessions:
show sessions admin
clear sessions admin telnet [session-id]
These commands display and clear management sessions from a remote client to the WSS’s Telnet server.
To display the Telnet server sessions on a WSS, type the following command:
WSS# show sessions admin
3 admin sessions
To clear all Telnet server sessions, type the following command:
WSS# clear sessions telnet
This will terminate manager sessions, do you wish to continue? (y|n) [n]y
Cleared telnet session on tty2
(To manage Telnet client sessions, see “Logging in to a remote device” (page 146).)
Managing HTTPS
Enabling HTTPS
HTTPS is disabled by default. To enable HTTPS, use the following command:
set ip https server {enable | disable}
Note. If you type the clear sessions admin telnet command from within a Telnet
session, the session ends as soon as you press Enter.
T ty U se rn am e Ti me (s ) Ty pe
t t y 0 3 6 4 4 C o n s o l e
t t y 2 te c h 6 Te l n e t
tty3 sshadmin 381 SSH
Caution! If you disable the HTTPS server, Web View access to the switch is also
disabled.