Filter
Top Products
Remote Maintenance by telnet
229
6
❖ CNAME registration
msh> dns cname {on|off}
• You can specify whether to register CNAME.
• {on} means “active” and {off} means “inactive”.
• The CNAME registered is the default name beginning with rnp. CNAME
cannot be changed.
❖ A records registration
msh> dns arecord {dhcp|own}
•{dhcp}
You can specify the method of registering an A record when the dynamic
DNS function is enabled and DHCP is used.
•{own}
To register an A record using the printer as the DNS client.
The DNS server address and the domain name already designated are
used for the registration.
❖ Record updating interval settings
msh> dns interval “time”
• You can specify the interval after which records are updated when using
the dynamic DNS function.
• The updating interval is specified hourly. It can be entered between 1 and 255 hours.
• The default is 24 hours.
domainname
Use the “domainname” command to display or configure the domain name settings.
You can configure the Ethernet interface or IEEE 802.11b interface.
❖ View settings
The following command displays the current domain name:
msh> domainname
❖ Interface domain configuration
msh> domainname “interface_name”
❖ Setting the Domain Name
msh> domainname “interface_name” name “domain name”
• A domain name can be entered using up to 63 alphanumeric characters.
• The Ethernet interface and IEEE 802.11b interface will have the same domain name.
• wlan can be specified only when the IEEE 802.11b interface is installed.
❖ Deleting the Domain Name
msh> domainname “interface_name” clear name
Interface Interface set
ether Ethernet interface
wlan IEEE 802.11b interface