Filter
Top Products
Printing Files Directly from Windows
291
8
C When printing a binary file, set the file mode to binary.
ftp> bin
When printing a binary file in ASCII mode, print may not come out correctly.
D Specify files to be printed.
The following shows the examples of printing a PostScript file named “file 1”
in the “C:\PRINT” directory and printing file 1 and file 2.
ftp> put C:\PRINT\file1 filetype=RPS
ftp> mput C:\PRINT\file1 C:\PRINT\file2
E Quit ftp.
ftp> bye
Note
❒ “=”, “,”, “_”, and “;”cannot be used for filenames. File names will be read
as option strings.
❒ For “mput” command, option can not be defined.
❒ For “mput” command, “*” and “?” can be used as wild cards in file names.
❒ When printing a binary file in ASCII mode, print may not come out correctly.
sftp
To use the “sftp” command, a client software is required.
Use the client software that is compliant with ssh ver2.
A Start the client software.
“psftp>open “host name”” appears.
B Enter the host name, and then press the {Enter} key.
“Login as: “user name”” appears.
C Enter the user name, and then press the {Enter} key.
When you access the “sftp” command initially , “Store key in cache? (y/n)”
message appears. Select whether or not to store the key and key information,
and then press the {Enter} key.
The entered “user name” and “host name” appears.
D Enter the password, and then press the {Enter} key.
The entered password will not appear.
Note
❒ Not all client can use this function.
Reference
For details, see the client software help or the manual help.