Filter
Top Products
Preparing for Printing
64
1
If Bidirectional Communication is Disabled
Set up option settings when bidirectional communications are disabled.
Important
❒ Under Windows 2000/XP and Windows Server 2003, Manage Printers per-
mission is required to change the printer properties in the [Printers] folder.
Log on as an Administrators or Power Users group member.
❒ Under Windows NT 4.0, Full Control permission is required to change the
printer properties in the [Printers] folder. Log on as an Administrators or Pow-
er Users group member.
A On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
B Click the icon of the printer you want to use.
C On the [File] menu, click [Properties].
D Click the [Change Accessories] tab.
If options in the [Change Accessories] tab are disabled, bidirectional connection
is enabled. In this case, no change is necessary for option settings.
If you are using the RPCS printer driver, click the [Change Accessories...] tab.
If you are using the PS printer driver, click the [Device Settings] tab.
E Select options installed from the [Option] area, and then make the necessary
settings.
F Select the total amount of the memory in [Total Memory:], when the optional
SDRAM module is added.
G Under [Paper source tray settings], click and highlight the tray to be used, and
then select the appropriate size, position, and type for the tray. Select the
[Tray locking] check box to exclude the tray from the targets of automatic tray
selection.
H Click [OK] to close the printer properties dialog box.