Filter
Top Products
Monitoring and Configuring the Printer
268
6
Message List
This is a list of messages that appear in the printer's system log. The system log
can be viewed using the “syslog” command.
System Log Information
Use the following command to display the system log information:
• UNIX: Use the “syslog” command and “rsh”, “rcp”, “ftp”, and "sftp" parameters.
• telnet : Use the “syslog” command.
Message Problem and solutions
Access to NetWare server <file server name>
denied. Either there is no account for this print
server on the NetWare server or the password
was incorrect.
(In the print server mode) Login to the file
server failed. Make sure that the print server is
registered on the file server. If a password is
specified for the print server, deleteit.
account is unavailable: Same account name be
used.
User account is disabled. This could be be-
cause it use the same account name as the ad-
ministrator account.
account is unavailable: The authentication
password is not set up.
User account is disabled. This could be be-
cause the authentication password is not set,
and only the encryption account is set.
account is unavailable: encryption is impossi-
ble.
Encryption is not possible and account is dis-
abled. This could be because:
• Security option is not installed.
• Encryption password has not been speci-
fied.
add_sess_IPv4: bad trap<IPv4 address>, com-
munity:<community name>
The IPv4 address (0.0.0.0.) is unavailable when
the community access type is TRAP. Specify
the host IPv4 address for the TRAP destina-
tion.
add_sess_IPv6: bad trap<IPv6 address>, com-
munity:<community name>
The IPv6 address [::] is unavailable when the
community access type is TRAP. Specify the
host IPv6 address for the TRAP destination.
add_sess_IPv4: community<community
name> already defined.
The same community name already exists.
Use another community name.
add_sess_IPv6: community <community
name> already defined.
The same community name already exists.
Use another community name.
add_sess_IPX: bad trap<IPX address>commu-
nity <community name>
The IPX address (00:00:00:00:00:00) is unavail-
able when the community access type is
TRAP. Specify the host IPX address for the
TRAP destination.
add_sess_IPX: community <communi-
tyname> already defined.
The same community name already exists.
Use another community name.
Attach FileServer= <file servername> Connection to the file server as the nearest
server has been established.