Filter
Top Products
Dial Plan Configuration File Commands 101
See “List of Dial Plan Commands” on page 103 for a complete list and
description of each dial plan command, including syntax and arguments.
Command syntax is case insensitive. In the sample dial plans (supplied
with the system), and in this section, commands use upper and lower
case to make them easier to read.
An entry that begins with “n” for example, nDialPlanID, indicates an
integer field. Integer IDs are used in many places, and must be within
the range 1 through 32768. The system reserves dial plan table ID
numbers 1, 2, and 3 for Internal, Incoming, and Least Cost Routing,
respectively.
An entry that begins with “sz” (for example, szDescription) indicates a
field composed of alphanumeric characters. Acceptable characters are
a through z, A through Z, and 0 through 9.
Each line in the configuration file must contain a complete command.
The NBX system reads all lines in the configuration file, and ignores only
those lines containing one or more syntax errors. The system treats any
line beginning with / (forward slash) as a comment and ignores it.
CAUTION: Do not place comments at the end of a command line.