Filter
Top Products
208 CHAPTER 3: DEVICE CONFIGURATION
Table 41 describes each field in the dialog box.
Table 41 Analog Terminal Adapter - Advanced Settings Parameters
Field Purpose
MAC Address The factory-assigned MAC address for the Analog
Terminal Card or the Analog Terminal Adapter.
NOTE: The ports on a 3C10114 Analog Terminal Card
have sequential MAC addresses.
The ports on a 3C10114C Analog Terminal Card have
the same MAC address, and a Virtual Device Number
(VDN), in square brackets after it, provides a unique
identifying number to each port.
Audio Level Controls
Audio Input Gain (dB) Set this value to control the volume of the audio signal
from the analog telephone attached to this ATA or ATC
port.
Default: Depends on the country in which the NBX
system is operating. When you load a regional pack
(Operations > Regional Software) and select the tones
and cadences appropriate for your location
(System Configuration > System Settings >
Regional Settings > Advanced), the default value is set.
Minimum: - 10 dB
Maximum: + 10 dB
Mute is a choice provided for testing purposes.
Audio Output Gain (dB) Set this value to control the volume of the audio signal
sent to the analog telephone attached to this ATA or
ATC port.
Default: Depends on the country in which the NBX
system is operating. When you load a regional pack
(Operations > Regional Software) and select the tones
and cadences appropriate for your location
(System Configuration > System Settings >
Regional Settings > Advanced), the default value is set.
Minimum: - 10 dB
Maximum: + 10 dB
Mute is a choice provided for testing purposes.