Filter
Top Products
74 CHAPTER 2: DIAL PLAN
Advanced Settings The NBX system transmits VPIM voice mail messages by attaching them
to e-mail messages that are sent using SMTP (Simple Mail Transfer
Protocol) or ESMTP (Extended Simple Mail Transfer Protocol).
Click the Advanced Settings button to access the Advanced Settings
dialog box. Set the parameters to control the behavior of SMTP. Table 18
describes the fields.
Last system reboot The date and time of the most recent reboot of the NBX
system. An NBX system reboot resets all VPIM statistics
to 0 (zero).
If this field’s date and time are more recent than Last
reset command, then the NBX system began to collect
the currently displayed statistics at this date and time.
Table 17 Statistics Window Fields (continued)
Field Purpose
Table 18 VPIM Advanced Settings Dialog Box
Field Purpose
SMTP OK response Definition: The amount of time that the local
system waits for a response from the remote system.
Detail: After the local system attempts to open a
connection to the remote system, it waits for a
response giving the status of the connection.
Minimum: 5 minutes
Default: 5 minutes
SMTP HELO response Definition: The amount of time that the local
system waits for an acknowledgement of a HELO
message.
Detail: After the greeting, the local system sends
either a HELO (or EHLO to get ESMTP) message to
identify itself. The other site then responds with an
acknowledgement of that message.
Minimum: None defined.
Default: 5 minutes