Filter
Top Products
Configuring the NBX 1105 Attendant Console 173
PG 482–531
(SuperStack 3)
PG 500–531
(NBX 100)
Identifies a specific Pickup Group extension and maps it to
this button.
This setting allows a user to pick up a call on any extension
in the selected Pickup Group without dialing the Pickup
Group extension. Your telephone and the ringing
telephone must be part of the same Pickup Group unless
the “Allow Non-Member Pickup” check box is enabled for
the group.
Number — Not used.
Prty (Priority) — Not used.
Pickup Ext. Maps the Pickup Extension function to this button.
The Pickup Extension function picks up a call for a
particular extension.
After you press this button, you must enter the extension
number of the ringing telephone.
This function is similar to Directed Call Pickup (see DP
540–589 and DP 540–549, later in this table).
Number — Not used.
Prty (Priority) — Not used.
Pickup Group Maps the Pickup Group function to this button.
This setting allows you to pick up a call on any extension in
the selected Pickup Group. Your telephone and the ringing
telephone must be part of the same Pickup Group unless
the “Allow Non-Member Pickup” check box is enabled for
the group.
To use the Pickup Group button, the user presses the
mapped button and then dials the Pickup Group extension.
For one-touch access to a specific Pickup Group extension,
see the description for PG 482–531 (SuperStack 3) and PG
500–531 (NBX 100) later in this table).
Number — Not used.
Prty (Priority) — Not used.
Table 30 Feature Button Mappings (continued)
Function Description