Filter
Top Products
366 CHAPTER 10: TROUBLESHOOTING
Configuration and
Status Reports
You can obtain the status of all Digital Line Cards in the NBX system with
either of these two methods:
Select NBX NetSet > Device Configuration > Digital Line Cards and:
■ Click Config & Status Report. The formatted report appears on the
screen with headings shown in a larger font.
■ Click Export Report. The unformatted report appears on the screen. To
save the report as an ASCII text file, select Save as from the File menu
of your browser.
Table 80
describes in alphabetical order (not the order of appearance) the
headings in the Configuration and Status Report.
RA (Remote Alarm) On: Indicates a Yellow Alarm state on the card.
To confirm that the Yellow Alarm state exists:
1 Log on to NBX NetSet using the administrator login ID and
password.
2 In the NBX NetSet - Main Menu window, click Device
Configuration.
3 Click the Digital Line Cards tab.
4 In the Select Device Type drop-down list, if you are using a
T1 Digital Line Card, select T1 Span List or, if you are using
an E1 Digital Line Card, select ISDN PRI Span List.
5 Click Apply.
6 Select the span you want and click Status. The words
Yellow Alarm appear in the Status field.
NOTE: This light is used only on the T1 Digital Line Card.
LB (Loop Back) On: Indicates that the card is in loop-back testing mode.
NOTE: This light is not used to indicate any of the Red, Blue,
or Yellow alarms.
Table 79 Digital Line Card Status Lights (continued)
Status Light Purpose
Table 80 Configuration and Status Report Headings
Heading Description
#Chs Number of channels.
#Dsp Number of digital signal processors.
#OffCh Number of channels in the offline state.