Filter
Top Products
Configuring the NBX 1105 Attendant Console 175
Switch to DTMF Maps this button to the feature that switches this Analog
Line Card port from pulse dialing to tone dialing (DTMF).
Press this button once to switch to tone dialing. You
cannot switch from tone dialing back to pulse dialing
during a call. When you hang up the telephone, the Analog
Line Card port reverts to its default setting, either pulse
dialing or tone dialing, as configured by the system
administrator.
Number — Not used.
Prty (Priority) — Not used.
System Intercom calls and outside calls from lines not mapped to
specific buttons ring on a System button. To call an outside
number from a System line, you must access a line pool by
dialing either 9 or 8, depending on your line pool
configuration.
By default, the bottom 3 buttons with lights have their
Type set to System.
Number — Not used.
Prty (Priority) — The button with the lowest value in the
Prty (Priority) field is the one that becomes active when you
lift the receiver or press the Speaker button.
System Open, Closed,
Lunch, Other
Maps one of four system modes to this button. When the
button is pressed, it sets the Automated Attendant to play
the prompts appropriate to the selected mode (Open,
Closed, Lunch, or Other) when callers dial into the system.
Number — Not used.
Prty (Priority) — Not used.
Transfer Allows you to transfer a caller to an internal extension or an
external telephone number.
Number — Not used.
Prty (Priority) — Not used.
Xfer Vmail Allows you to transfer a caller directly to another person’s
mailbox.
Number — Not used.
Prty (Priority) — Not used.
Table 30 Feature Button Mappings (continued)
Function Description