Filter
Top Products
144 CHAPTER 3: DEVICE CONFIGURATION
To change the name of a telephone group:
1 Select NBX NetSet >
Device Configuration > Telephone Groups.
2 Select the group whose name you want to change.
3 Click Modify. The Modify Telephone Group dialog box appears.
4 Change the name of the telephone group in the Group Name field.
5 To set call recording and monitoring as the default condition for all
telephones in this telephone group, enable the Call Record & Monitor
check box. To disable call recording and monitoring, clear the check box.
You must have installed a call recording license before you can enable the
Call Record & Monitor check box.
6 Click OK.
Removing a
Telephone Group
You can remove a telephone group if it is no longer needed.
To remove a telephone group:
1 Select NBX NetSet >
Device Configuration > Telephone Groups.
2 Select the group you want to remove.
3 Click Remove. A confirmation window appears.
4 Click Yes.
The system removes the group.
Viewing Telephone
Group Membership
You can view a report that describes which telephones belong to each
telephone group. The report also includes membership information about
Class of Service groups.
To view the membership report, click Membership.
You do not need to select a telephone group first. The report includes
information about all telephone groups.
In the report window, click any of the column headings to arrange the
information in ascending or descending order.
Recording and
Monitoring
Telephone Calls
If you have call recording application software that runs on a PC that is
external to the NBX system, you can record and monitor telephone calls
to and from telephones on the NBX system.