Agilent Technologies B2201A Switch User Manual


 
5-16 Agilent B2200 User’s Guide, Edition 2
SCPI Command Reference
Command Summary
Ground Mode Commands
[:ROUT]:AGND:CHAN:DIS:CARD card_number Ground-disables the specified card.
card_number: 0 or ALL for Auto Config,
1, 2, 3, 4, or ALL for Normal Config
[:ROUT]:AGND:CHAN:DIS[:LIST] (@channel_list)
[:ROUT]:AGND:CHAN:DIS[:LIST]? (@channel_list)
Ground-disables the specified channels.
channel_list: Channels to ground-disable.
Query returns the status of the specified channels:
1 (disabled) or 0 (enabled).
channel_list: Channels to check.
[:ROUT]:AGND:CHAN:ENAB:CARD card_number Ground-enables the specified card.
card_number: 0 or ALL for Auto Config,
1, 2, 3, 4, or ALL for Normal Config
[:ROUT]:AGND:CHAN:ENAB[:LIST] (@channel_list)
[:ROUT]:AGND:CHAN:ENAB[:LIST]? (@channel_list)
Ground-enables the specified channels.
channel_list: Channels to ground-enable.
Query returns the status of the specified channels:
1 (enabled) or 0 (disabled).
channel_list: Channels to check.
[:ROUT]:AGND:PORT card_number,ground_port
[:ROUT]:AGND:PORT? card_number
Specifies the input Ground Port for the specified
card.
c
ard_number: 0 or ALL for Auto Config,
1, 2, 3, 4, or ALL for Normal Config
ground_port: 1 to 14 or -1
Query returns the input Ground Port number for the
specified card.
card_number: Card to check. 0 for Auto Config,
1, 2, 3, or 4 for Normal Config.
[:ROUT]:AGND[:STAT] card_number,state
[:ROUT]:AGND[:STAT]? card_number
Sets the ground mode for the specified card.
card_number: 0 or ALL for Auto Config,
1, 2, 3, 4, or ALL for Normal Config
state: ON / 1 (mode ON) or OFF / 0 (mode OFF)
Query returns the mode status of the specified card:
0 (OFF) or 1 (ON).
card_number: Card to check. 0 for Auto Config,
1, 2, 3, or 4 for Normal Config.
Command Description